Spesifikasi Mesin Pengkodean Inkjet Printer DOD SquidInk SQ2
SQ / 2 besar tinta karakter sistem jet cetak berkualitas tinggi karakter dot-matrix pada berbagai produk dengan harga yang hemat biaya. SQ / 2 menawarkan harga terendah per karakter dicetak dalam industri saat ini. Pengguna dapat memilih antara dua model: model berbasis air untuk mencetak pada permukaan berpori seperti karton bergelombang, atau sebagai sistem berbasis pelarut untuk mencetak pada produk non-berpori seperti plastik, peregangan membungkus, logam dan banyak lagi.
Printer Type
|
Large character ink jet printer
|
Character Height
|
.75″ (1.9cm) in 7 x 5 matrix; .5″ (1.3cm) in 5 x 5 matrix, or
.5″ (1.3cm) in 7 x 5 matrix; .375″ (1cm) in 5 x 5 matrix, or
.375 (1cm) in 7 x 5 matrix; .25 (.6cm) in 5 x 5 matrix
|
Character Set
|
61 character ASCII set
|
Print Speed
|
20 feet/minute (6.1m/minute) to 200 feet/minute (61m/minute) line speed; optional extended character
width firmware allows for print speeds slower than 20 feet/minute
|
Message Length
|
60 characters per message; 64 memory locations
|
Communication
|
RS-232C, 9600 baud, 8 data bits, 1 start, 1 stop, Asynch
|
Software Features
|
24-hour clock, Julian date, counter, lot counter
|
Operating Features
|
Dot size, print delay, character width, photocell on/off, invert print, reverse print, purge routine
|
SQ/2 Exchange Program
|
Eliminates the need for costly service calls and minimizes downtime; troubled printheads and
components can be replaced in less than 5 minutes
|
Controller Dimensions
|
12″ (31cm) H x 12″ (31cm) W x 5.25″ (13cm) D
|
Controller Weight
|
10.5 lbs. (4.8kg)
|
Printhead Dimensions
|
3″ (7.6cm) H x 1.6″ (4.1cm) W x 7″ (17.8cm) L; dimensions are for the printhead only – an additional
3″ (7.6cm) is needed for the ink line and cabling which extends from the back of the printhead
|
Product Sensor
|
Diffuse beam photocell (24v) or hardware sinking signal
|
Electrical Requirements
|
110/120 VAC, 50/60Hz, 1.6 amp
|
Cabinet Construction
|
Industrial gauge coated steel
|
Operating Environment
|
38°F (3°C) to 122°F (50°C)
|
Substrate Capabilities
|
Porous or Non-Porous surfaces
|
Air Requirements
|
No external air needed
|
Ink Capabilities
|
Porous: Squid Ink SQ-60™ no-clog ink
Non-Porous: Several Squid Ink solvent based fluids to meet adhesion and dry time needs
|
Ink Volume
|
.5 (1.89 liters) gallon bottle standard; available upgrade (water-base ink only) to 5.0 gallon pail
(18.93 liters
|