Mesin Pengkodean

Hal Ini Berlaku Untuk Pencetakan Pada Kebanyakan Pembungkus Fleksibel Dengan Luas Cetak 25Mm * 50Mm, Tidak Berwarna, Tidak Ada Smell.Non Beracun, Konsumsi Rendah Dan Tinggi Yang Efisien Tanpa Suara.Hal Ini Dapat Mencetak Berbagai Macam Satu Dimensi Dan Dua Dimensi Hingga 300Dpi Kode Bar Pada Berbagai Film, Kecepatan Tinggi Dan Efek Cetak Stabil Memberikan Kelayakan Pencetakan Bar Code Dan Pola.Real-Time Variabel Imformation: Jam Internal Mencapai Berbagai Waktu Reak Dan Tanggal Saat Mencetak Tepat Waktu, Seperti Tanggal Produksi, Tanggal Kadaluwarsa, Nomor Lot, Nomor Seri Dan Kode Bar DllHal Ini Economial: Menggunakan 60Mm * 300M Pita Untuk Mencetak Hingga 20 ~ 25 Ribu Kali Dari Dua Baris Imformation Yang Dapat Merasa Puas Dengan Kebanyakan Pelanggan Yang Produksinya Untuk Semua Hari Dalam Satu Mesin.Parameter/ModelAc-8ARemarkPrint Area25Mm*50Mm/Print Speed50Mm/S~200Mm/S(70~75 Times/Min)IntermittentPower Supply(V)100-230V Ac(+/-10%)50-60Hz/Temperature5℃~40℃（41℉~104℉） Ribbon Size60Mm*300MDepends On Different Packing FilmsInput SignalPrinting Signal/No Ribbon Alert/Fault Alert ControllerHigh-Light Self-Illuminating Display   

The PZ Pilot Pro hi-resolusi ink jet sistem pencetakan Pro menawarkan 2.1 "height cetak dari print head tunggal dengan kemampuan untuk menjalankan hingga 4 print heads dari controller tunggal. The PZ Pilot Pro menawarkan serbaguna, namun biaya solusi efektif untuk Anda coding aplikasi. The PZ Pilot Pro menggunakan 380 Print Head yang mencetak hingga ketinggian 2,1 " , melebihi spesifikasi GS1 untuk mencetak kode kasus tanpa biaya tambahan print head yang lebih besar. Industri teknologi terbukti piezo menghasilkan teks yang jelas(tajam) dan mencetak untuk meningkatkan kegelapan bar code daya scannya.    Print Technology Piezo impulse printhead technology Printheads Up to four high resolution, 380 channelpiezo printheads Maximum Print Height 2.1″ (53.3 mm) per 380 printhead,meets GS1 specification for case code printing Vertical Print Resolution 180 dpi capable of printing razorsharpgraphics, small character text, and scannable bar codes Horizontal Print Resolution 180 dpi Print Speed Up to 167 feet/minute @ 180 dpi with380 printhead Time & Date Internal real time clock with battery back-up Product Sensor Reflective sensor standard with dual photocellinputs standard Communication Interface Four USB host, ethernet Touchscreen 6.4″ color display Ink System Active ink system; dual 400ml ink canister standard Low Ink Indicator Warning messages alert user on thetouchscreen display, LED beacon optional Substrate Capabilities  Porous surfaces  Cabinet Construction Stainless steel, solvent-resistant colortouchscreen display      Electrical Requirements  90 – 264 VAC, 50/60 Hz     Operating Environment  50°F - 104°F (10°C - 40°C)     Storage Environment  0°F - 140°F (-18°C - 60°C)  

Sistem pencetakan AutoPilot akan mencetak hingga 0,7 "karakter hi-resolusi, teks tajam, kode bar yang dapat dipindai, dan Logo yang terlihat bagus. Pengguna dapat menjalankan hingga dua printhead dari touchscreen controller tunggal untuk memaksimalkan efisiensi dan mencetak pada sisi berlawanan dari masalah jika diperlukan. AutoPilot ini mampu menjalankan tinta berbasis minyak atau berbasis pelarut untuk mencetak pada berbagai substrat. Terbaik dari semua, 180 dpi resolusi cetak AutoPilot ini memenuhi kebutuhan aplikasi Anda untuk kualitas coding dan marking.     Print Technology Piezo impulse printhead technology Maximum Print Height .7" (1.8cm) per printhead Vertical Print Resolution 180 dpi capable of printing razor-sharp graphics, small character text, and scannable bar codes Horizontal Print Resolution 180 dpi Print Speed Up to 135 feet/min. (41 m/min.) @ 180 dpi Time & Date Internal real time clock with battery back-up Product Sensor Built in product sensors, optional external photocell Communication Interface Two USB host and one ethernet input Touchscreen 12.1" (30 cm) full color touchscreen display Ink System 200ml ink cartridge Low Ink Indicator Warning messages alert user on the printer and touchscreen, LED light beacon optional Substrate Capabilities Porous or Non-Porous surfaces Electrical Requirements 90 - 264 VAC, 50/60 Hz     Operating Environment 34°F - 104°F (1° - 40°C)     Storage Environment 0°F - 140°F (-18° - 60°C)    Agency Certifications UL, CE, and CSA certified   

Mesin PZ PILOT TOUCH ini adalah sistem pencetakan kaya fitur yang dirancang untuk mencetak karakter hi-resolusi, razor teks yang tajam, kode bar yang dapat dipindai, dan logonya terlihat bagus 185 dpi. The PZ PILOT TOUCH menawarkan lebih banyak pilihan untuk membuat merek anda: sistem berbasis minyak untuk mencetak pada permukaan berpori seperti obyek bergelombang, atau sistem berbasis pelarut untuk mencetak pada produk non-pori seperti plastik, logam dan banyak lagi..     Print Technology Piezo impulse printhead technology Maximum Print Height .7" (1.8cm) per printhead Vertical Print Resolution 180 dpi capable of printing razor-sharp graphics, small character text, and scannable bar codes Horizontal Print Resolution 180 dpi Print Speed Up to 135 feet/min. (41 m/min.) @ 180 dpi Time & Date Internal real time clock with battery back-up Product Sensor Built in product sensors, optional external photocell Communication Interface Two USB host and one ethernet input Touchscreen 12.1" (30 cm) full color touchscreen display Ink System 200ml ink cartridge Low Ink Indicator Warning messages alert user on the printer and touchscreen, LED light beacon optional Substrate Capabilities Porous or Non-Porous surfaces Electrical Requirements 90 - 264 VAC, 50/60 Hz     Operating Environment 34°F - 104°F (1° - 40°C)     Storage Environment 0°F - 140°F (-18° - 60°C)    Agency Certifications UL, CE, and CSA certified   

Streamline 4 Printing System Specifications Printer Type - Continuous Ink Jet Printing System Print Rate - Up to 2160 characters/second, depending on print matrix Font Matrix Capability – Up to 4 lines (7X5 dot), up to 5 lines (5X5 dot) Font Matrix Configuration – 5X5, 7X5, 9X7, 12X10, 16X12, 24X18 and 32X24 Character Height – 1.8mm to 15mm; Up to 32 dot high font with single line of text Throw Distance – Optimum print quality at .5” (13mm) distance from printhead to substrate Keyboard/Display – Simple to use, touchscreen keyboard with Pinyin input method for Chinese characters; easy to read LCD backlit display Message Storage – 26 message memory with up to 79 characters in each Graphics – Flexible logo, graphics, and character storage; keyboard programmable characters Software Features – Counter, lot counter, shift code, time and date, expiration date Operating Features – Print delay, reverse print, invert print, bold print (up to 9x), auto-start self-clean Auto-Start – Quick and easy one button start/stop process for automatic self-cleaning operation Communication Interface – Standard connections for shaft encoder, product detect and RS-232 serial port Product Sensor – Diffuse beam photocell included; additional photocells available Printhead – Compact and durable stainless steel design, omni-directional set-up capability Printhead Dimensions - 10 (25.4cm) long, 1.5 inches (3.8cm) in diameter Printhead Cable – Vinyl-covered armored conduit, 10’ (3m) umbilical length Cabinet Construction – Wall mountable or free standing stainless steel cabinet Cabinet Dimensions – 337mm X 338mm X 600mm Electrical Requirement – 110/220VAC, 50/60Hz Operating Environment - 40°F - 115°F (5° - 45°C) Humidity Range – 30 – 95% relative humidity, non-condensing Weight – 57 lbs. (26kg) Inks – Comprehensive range of inks for a variety of applications and industry requirements

Printer Inkjet Mesin Pengkodean DOD HiRes SquidInk CoPilot Coding Printer DOD, Inkjet Printer DOD HiRes SquidInk CoPilotMesin Copilotini menggunakan Xaar teknologi piezo terbukti mencetak hingga 0,7 "karakter hi-resolusi, teks tajam, kode bar yang dapat dipindai, dan Logonya terlihat bagus di 185 dpi dan 4,3" touchscreen penuh warna memberikan akses ke sistem internal pesan dan fungsi cetak. Pesan dibuat dan diedit di Squid Ink mudah digunakan Orion ™ Software PC dan ditransfer melalui Ethernet atau perangkat USB. Untuk aplikasi yang lebih besar, beberapa sistem pencetakan copilot dapat terhubung melalui Ethernet atau nirkabel dan dikontrol melalui satu stasiun Orion cetak pusat.     Print Technology Piezo impulse printhead technology Maximum Print Height .7" (1.8cm) per printhead Vertical Print Resolution 185 dpi capable of printing razor-sharp graphics, small character text, and scannable bar codes Horizontal Print Resolution 205 dpi Print Speed Up to 135 feet/min. (41 m/min.) @ 205 dpi Time & Date Internal real time clock with battery back-up Product Sensor External photocell. Optional encoder Communication Interface One USB host and one Ethernet input Touchscreen 4.3″ (10.9 cm) full color touchscreen display Ink Cartridge Volume 200ml Integrated Ink System Allows mechanical rotation of printhead to accommodate tilt conveyors or web applications; 0-90degrees counterclockwise; 0-45 degrees clockwise (ink cartridge facing up) Low Ink Indicator Message alert on touchscreen, LED light beacon optional Substrate Capabilities Porous or Non-Porous surfaces Electrical Requirements 100 - 240 VAC, 50/60 Hz    Operating Environment 34°F - 104°F (1° - 40°C)    Storage Environment 0°F - 140°F (-18° - 60°C)    Agency Certifications CE, TUV pendingCV. Adhitya Pratama adalah Agen dan Distributor Mesin Pengemas, Mesin Sachet, Automatic Packaging, Printer Cading, Mesin Sealer, Mesin Shrink, Vertical Packing Machine, Horizontal packing Machine, Large Volume Packing Machine, Tea Bag Packing Machine, Heads Weigher Packing Machine, Sealer Machine, Shrink Packing Machine, Strapping Machine, Cartooning Machine, Consumable Part, Online Induksi Sealing Machine dan sebagainya.  CV. Adhitya Pratama Komplek Ruko Danau Sunter A / 8, Jl. Sunter Jaya 1. No Telepon 087889999610 (bapak Thonie) www.packagingsachet.com 

SQ / 2 besar tinta karakter sistem jet cetak berkualitas tinggi karakter dot-matrix pada berbagai produk dengan harga yang hemat biaya. SQ / 2 menawarkan harga terendah per karakter dicetak dalam industri saat ini. Pengguna dapat memilih antara dua model: model berbasis air untuk mencetak pada permukaan berpori seperti karton bergelombang, atau sebagai sistem berbasis pelarut untuk mencetak pada produk non-berpori seperti plastik, peregangan membungkus, logam dan banyak lagi.  Printer Type Large character ink jet printer Character Height .75″ (1.9cm) in 7 x 5 matrix; .5″ (1.3cm) in 5 x 5 matrix, or.5″ (1.3cm) in 7 x 5 matrix; .375″ (1cm) in 5 x 5 matrix, or.375 (1cm) in 7 x 5 matrix; .25 (.6cm) in 5 x 5 matrix  Character Set 61 character ASCII set Print Speed 20 feet/minute (6.1m/minute) to 200 feet/minute (61m/minute) line speed; optional extended characterwidth firmware allows for print speeds slower than 20 feet/minute Message Length 60 characters per message; 64 memory locations Communication RS-232C, 9600 baud, 8 data bits, 1 start, 1 stop, Asynch Software Features 24-hour clock, Julian date, counter, lot counter Operating Features Dot size, print delay, character width, photocell on/off, invert print, reverse print, purge routine SQ/2 Exchange Program Eliminates the need for costly service calls and minimizes downtime; troubled printheads andcomponents can be replaced in less than 5 minutes Controller Dimensions 12″ (31cm) H x 12″ (31cm) W x 5.25″ (13cm) D Controller Weight 10.5 lbs. (4.8kg) Printhead Dimensions 3″ (7.6cm) H x 1.6″ (4.1cm) W x 7″ (17.8cm) L; dimensions are for the printhead only – an additional3″ (7.6cm) is needed for the ink line and cabling which extends from the back of the printhead  Product Sensor Diffuse beam photocell (24v) or hardware sinking signal  Electrical Requirements 110/120 VAC, 50/60Hz, 1.6 amp Cabinet Construction Industrial gauge coated steel Operating Environment 38°F (3°C) to 122°F (50°C) Substrate Capabilities Porous or Non-Porous surfaces Air Requirements No external air needed Ink Capabilities Porous: Squid Ink SQ-60™ no-clog inkNon-Porous: Several Squid Ink solvent based fluids to meet adhesion and dry time needs Ink Volume .5 (1.89 liters) gallon bottle standard; available upgrade (water-base ink only) to 5.0 gallon pail(18.93 liters  

Jual Mesin Pengkodean SQ / 2 Scorpion industri besar printer ink jet karakter termasuk upgrade software memberikan lebih banyak fitur. Pengguna SQ / 2 Scorpion memiliki pilihan untuk memilih dari beberapa konfigurasi print head. Lima ukuran print heads yang berbeda yang tersedia, menawarkan 12 ukuran cetak mulai tinggi dari 3/8 "sampai 1 3/4".1600 Series print headsmenawarkan kemampuan split-line dan pilihan untuk mencetak karakter ukuran penuh atau setengah ukuran karakter dengan PRINT HEAD yang sama.SQ/2 Scorpion Printing System Specifications     Printer Type Large character ink jet printing system Printhead Options Users have the option to use up to:two SQ/2 printheads, or one 1600 Series printhead Character Heights SQ/2 Series Printheads (7-channel dot matrix characters)• .75" (1.9cm) in 7 x 5 matrix; .5" (1.3cm) in 5 x 5 matrix, or• .5" (1.3cm) in 7 x 5 matrix; .375" (1.0cm) in 5 x 5 matrix, or• .375" (1.0cm) in 7 x 5 matrix; .25" (.6cm) in 5 x 5 matrix1600 Series Printheads (16-channel dot matrix characters)• 1.75" (4.5cm) in 16 x 10 matrix, with split-line capabilityto print two lines of the following size characters: .75" (1.9cm)at 7 x 5 matrix; .5" (1.3cm) in 5 x 5 matrix, or• 1.0" (2.5cm) in 16 x 10 matrix, with split-line capabilityto print two lines of the following size characters: .375" (1.0cm)at 7 x 5 matrix; .25" (.6cm) in 5 x 5 matrix Character Set 61 character ASCII set Print Speed Up to 200 feet/minute (61m/minute) line speed Message Length 128 character length per message; 128 memory locations Communication RS-232C, 9600 baud, 8 data bits, 1 start, 1 stop, Asynch Software Features Counter, lot counter, 24-hour clock, 8 or 12 hour programmableshift code, Julian date, 3-letter month name, 3-letter weekday name,expiration date, expiration month, expiration day, expiration year,expiration Julian date Operating Features Dot size, print delay, character width, photocell on/off, invert print, reverse print, purge routine Shaft Encoder Output Resident software allows communication with shaft encoder for usewith variable speed conveyors Component Modularity Eliminates the need for costly service calls and minimizes downtime;printheads and components can be replaced in less than 5 minutes Controller Dimensions 12" (31cm) H x 12" (31cm) W x 5.25" (13cm) D Controller Weight 10.5 lbs. (4.8kg) Printhead Dimensions SQ/2 Series Printheads: 3" (7.6cm) H x 1.6" (4.1cm) W x 7" (17.8cm) L1600 Series Printheads: 2.5" (6.4cm) H x 1.5" (3.8cm) W x 7" (17.8cm) LDimensions are for the printhead only – an additional 3" (7.6cm) isneeded for the ink line and printhead cabling which extends from theback of the printhead Product Sensor Diffuse beam photocell (24v) or hardware sinking signal Communication Interface Two RS-232 ports for connection to input device, host PC,and PLC for input from scale, scanner or external alarm Air Pump Internal air pump module provides necessary air pressure;external air not recommended Electrical Requirements – 90-120 VAC, 50/60Hz, 4.0 amp Cabinet Construction Industrial gauge coated steel Operating Environment Water-Based Ink: 32oF (0oC) to 120oF (50oC)Solvent-Based Ink: 0oF (-18oC) to 120oF (50oC) Substrate Capabilities Porous or Non-Porous surfaces     Ink Capabilities Porous: Squid Ink SQ-60 no-clog inkNon-Porous: Several Squid Ink solvent based fluids to meet yourapplication needs for adhesion and dry time      Ink Volume .5 gallon (1.9 liters) bottle standard; available upgrade(water-base ink only) to 5.0 gallon (18.9 liters) pail  

Mesin Pengkodean Squid Ink SQ LaserKEUNGGULAN SQ LASERCO2 and fiber marking systems10W, 20W, and 30W modelsStatic or continuous marking modesNo inks or solvents – environmentally friendly and cost-effectiveMarks on plastic, glass, metals, paper, chipboard, building products, foils, and moreSPESIFIKASI SYSTEMPrint Technology – CO2 laser coding system, full sealed RF-excited metal tubeLaser Wavelength – 10.6μmLaser Galvanometer – High-precision 2D high-speed scanning galvanometersCooling Method – Atmospheric air-cooledDust Way – SealedPower Consumption – 500W – 1000W (110VAC, 60Hz)Marking Focal Length – 100mm – 190mm (133mm currently on SQ-10 & SQ-30)Position Accuracy– 0.01mmMinimum Line Width – 0.1mmMarking Area – 50mm X 50mm – 175mm X 175mmAssembly Line Speed Support – <120m/minMarking Speed – 800 – 1000 characters/secondCharacter Size – Adjustable in marking rangeMarking Line Number – Code Rotation – 0 to 360°Software Features – Counter, lot counter, shift code, time and date, expiration dateOperating Languages – English and ChineseCabinet Construction – Heavy duty cast aluminumSQ-10 Cabinet Dimensions – 29” (74cm) L x 6.25” (16cm) W x 7.25” (19cm) HSQ-30 Cabinet Dimensions – 29” (74cm) L x 5.375” (14cm) W x 7.5” (19cm) HSQ-30 Power Controller Dimension – 13” (33cm) L x 5.5” (14cm) W x 10.25” (26cm) HElectrical Requirements – 90 – 240 VAC, 50/60HzOperating Environment – 40°F – 105°F (5°C – 40°C)Humidity Range – 10 – 90% relative humidity, non-condensingPackaged Weight – SQ-10: 56 lbs. (25kg); SQ-30: 67 lbs. (30kg)PERANGKAT TAMBAHANPrint Trigger – Optical, fiber optic, ultrasonic, laser, metal proximity, capacitive proximityEncoder – For operation with variable speed conveyorsMobile Stands – Heavy duty stand with ability to rotate laser controller in any direction and easily raise and lower marking machine by a single operator; includes casters for easy transportation within plantInstallation and Training – On-site installation and training available

1) The revolutionary Streamline 5 will operate with or without a wireless tablet, or it can be networked to run from a central location.2) Streamline’s entire ink system can slide out for routine maintenance or it can be completely replaced in minutes for annual PMs.3) The Streanmline 5 printhead features CleanJet™ technology for automatic one button self-cleaning operation.4) A comprehensive range of MEK, Acetone, or Ethanol-based inks are available for a variety of applications and industries.SYSTEM SPECIFICATIONS SYSTEM• Print Technology - Continuous Ink Jet• Nozzle Size - 70μm nozzle standard, 60μm and 50μm nozzle optional• Print Speed - Up to 1,000 feet/minute (305m/min) 7x5 font matrix• Max Print Lines – 5 lines @ 5x5 font, 4 lines @ 7x5 font matrix• Font Matrix Configurations – 5x5, 7x5, 9x7, 12x12, 16x16, 24x24, 32x32• Character Height – 0.07” - 0.59” (1.8mm - 15mm); up to 32 dot high font with single line of text• Throw Distance – Up to 1.2” (30mm) distance from printhead to substrate• Touchscreen/Display – Revolutionary wi-fi tablet HMI, printer may run with/without tablet; one tablet may be used to communicate with multiple Streamline printers or other Squid Ink printing systems using Orion software platform• Message Storage – Virtually unlimited• Software Features – Counter, lot counter, shift code, time and date, expiration date• Operating Features – Print delay, reverse print, invert print, bold print, auto-start self-clean• CleanJet™ – Quick and easy one button start/stop process for automatic self-cleaning operation• Communication Inputs – Photocell/trigger, encoder, reverse print, external counter increment• Communication Outputs - Alarm light (3-color), print ready, warning• Ports – Ethernet, RS-232, 3 USB ports for communication/wi-fi, alarm, tablet charging• Printhead – Compact and durable stainless steel design, omni-directional print capability• Printhead Dimensions – 9.25” (23.5cm) long, 1.5” (3.8cm) in diameter• Printhead Cable – Vinyl-covered armored conduit; 9.8’ (3m) umbilical length standard; 13.1’ (4m) optional• Cabinet Construction – Stainless steel cabinet• Cabinet Dimensions – 18” (46cm) H x 16.25” (42cm) W x 12.5” (32cm) D• Electrical Requirements – 90 - 240 VAC, 50/60HzSYSTEM SPECIFICATIONS (CONT.)• Operating Environment - 32°F - 140°F (0°C - 60°C).• Humidity Range – 30 – 95% relative humidity, non-condensing• Weight – 46 lbs. (21kg)• Inks – Comprehensive range of inks for a variety of applications and industry requirements including MEK, Acetone, and Ethanol-base; colors and soft pigment formulations available; no chips or RFID tags to deal withOPTIONAL ACCESSORIES• Print Trigger - Optical, fiber optic, ultrasonic, laser, metal proximity, capacitive proximity• Encoder – For operation with variable speed conveyors• Low Ink Light – Alerts users of low ink situations• Scan and Print – Allows message selection via bar code scanner• Mounting Brackets – Fully adjustable printhead floor stand eliminates vibration from conveyor• Stands – Stainless cart with two shelves to hold CIJ cabinet and supplies, includes casters• Printhead Pressurization Kit – Requires plant air• Cleaning Kit – Includes tools and supplies for cleaning• Installation and Training – On-site installation and training available